NOTE: The top layer of foam on the resting half of the case (foam is two layers deep on the bottom half) has been cut to fit my weapons however, the bottom layer is uncut and can be swapped to use on the top. I have all the filler pieces of foam to fill the cut outs back in. You can then just use my cut piece as the bottom pad, and the bottom as the top and none would be the wiser.
Here is the case from the outside
Here is how I laid everything out in it
And here is the only damage to the case. Minor cosmetic scuffing by the wheels.
This link goes to tech specs for the case
http://www.pelican.com/cases_detail/Case/1750/" onclick="window.open(this.href);return false;
Selling for $110.00
