Page 1 of 1

hmmm POF p308 or SA M1A...

Posted: Tue Feb 09, 2010 12:44 am
by AFJailor
Whenever I get back I would like to grab a semi-auto .308. I have been thinking about POF, but I have found that some people who bought them werent happy with them, while others think they are the greatest rifle on earth. Anybody here have any experience with them?

The other leading contender is the M1A from Springfield. I have fired M14's and M1A's before and like them...but I really dont like the ergonomics of the classic style stock. If i did go with the M1A i would get either the Sage stock or the Troy MCS which would put the price right up there with the POF.

Anyone have any other suggestions/input? I would like the rifle to be capable of 1MOA with good ammo and cost no more than about $2500.

I looked heavily at the Larue OBR but at $3000 for the basic model thats a bit too much.

Re: hmmm POF p308 or SA M1A...

Posted: Tue Feb 09, 2010 7:55 am
by gigag04
LMT has a .308 now.
Image
CQBMRP upper receiver with 16" chrome-lined 1:11.25" twist .308 barrel, standard semi-auto bolt carrier group, tactical charging handle assembly, Defender lower with SOPMOD buttstock and two-stage trigger group. MSRP: $2252.25 each
https://www.lewismachine.net/product.ph ... 4e197d89cb" onclick="window.open(this.href);return false;

Also - what about the M1A SOCOM or SOCOM II - it's pretty solid from what I've heard.
Image
Sale Price: $2047.73
http://www.springfield-armory.com/armory.php?model=22" onclick="window.open(this.href);return false;
http://www.springfield-armory.com/armory.php?model=18" onclick="window.open(this.href);return false;

I'd be super happy with either of these. I recently got a 556 CQBMRP and it is blowing me away. The monolithic one piece upper is awesome.

Re: hmmm POF p308 or SA M1A...

Posted: Tue Feb 09, 2010 11:02 am
by RECIT
I would go with the SOCOM with a quickness! I want one BAD but have not dropped my cash down yet. It is more reliable, more rugged, and just plain sexy. I own a LAR8 that is very nice. It is not a piston upper like the POF, but the OBR is not either. For your price range you can get a LAR8 AND quality optics! I have also seen some armalites and M1As on BUDSGUNSHOP.com for very reasonable prices. Be aware of the .308 mag situation before purchasing. Decide what type of rifle you want and make sure the mags are available and reasonably priced. Some are not and that drove me to purchase my LAR8 that uses FN FAL mags.

Re: hmmm POF p308 or SA M1A...

Posted: Wed Feb 10, 2010 4:26 am
by Ziran
The problem with POF 308 was the magazines. The DPMS mags that were the only serious option until recently frankly sucked. The recently released 308 PMAG fits the POF 308 and works like a charm.

You can read some more before and after first hand accounts of people that had POF 308 problems here (warning it has some choice language for DPMS/CPRODUCTS mags):

http://www.ar15.com/forums/topic.html?b ... 6&t=183759" onclick="window.open(this.href);return false;

The 20inch POF 308 can be had for about $2300:

http://www.gunbroker.com/Auction/ViewIt ... =157050533" onclick="window.open(this.href);return false;

Re: hmmm POF p308 or SA M1A...

Posted: Fri Feb 19, 2010 11:51 pm
by Zoomie
You could also look into the FNAR or the Kel Tec RFB for some more exotic options. I've heard nothing but good things about the FN AR.

http://www.fnhusa.com/le/products/firea ... id=FNM0176" onclick="window.open(this.href);return false;

http://www.gunblast.com/KelTec-RFB.htm" onclick="window.open(this.href);return false;

Re: hmmm POF p308 or SA M1A...

Posted: Sat Feb 20, 2010 3:48 pm
by RECIT
The Kel-Tec looks awesome. But I don't love the fit and finish of Kel-Tecs usually. They always feel cheap to me.

Re: hmmm POF p308 or SA M1A...

Posted: Mon Feb 22, 2010 2:23 am
by Zoomie
Since I have had no experience with the Kel Tec RFB, I asked my coach about it, and a number of his contacts had reported problems with the gun, he also pointed out that he would prefer a very high quality firearm if the round is going off right next to his face, and that Kel Tec and quality are rarely used in the same sentence (I'm sure some people will take issue with that statement).

Re: hmmm POF p308 or SA M1A...

Posted: Mon Feb 22, 2010 7:34 am
by The Annoyed Man
Keltec... Meh. I have one of their pistols, and it's not that impressive.

Of the .308s you've mentioned, I prefer the M1A variants, but I'm biased as I have a significant investment in one of my own — a "Loaded" model with full length stock and barrel. That said, my preference is based entirely on having lusted after one for 40 years, and only fairly recently (last November) having satisfied that lust. I could easily be very happy with an AR10 variant as well. At the time that I bought the Springfield, there was an AR10 and an FNAR bull barrel on the rack right next to it. I actually gave all three rifles a look-see, but my heart was in the M1A — oh, and in keeping with all the latest rage, it's a gas piston design too. :mrgreen: But if I were going to buy a second .308 semi-auto rifle today, it would be an AR10 variant, with or without gas piston, rather than the FNAR.

The M1A is a great rifle. If topped with a good scope, it easily meets your 1 MOA requirement. Depending on load, it is capable of better than that, but the average is right at 1 MOA. My groups, with all ammo fired to date, have been in the .5" to 1.5" range, depending on the cartridge fired. It tends to prefer 168 grain SMKs to anything else, although I had outstanding results with both Black Hills Gold 168 grain A-MAXs and the Hornady 168 grain HPBT Match. Best groups with those cartridges was a rare .5", and not with any great consistency. For hunting applications, it will shoot a best of .75 MOA using 165 grain Federal Fusion, and based on that bullet weight's performance, I've also purchased some Nosler Custom 165 grain Partitions I want to try; but that stuff is pretty pricey, so I don't plan on feeding her a steady diet of it.

Other things to think about in making your decision...

Weight: LMT doesn't list the weight of their rifle on their website, but a DPMS LR-308 weighs in at 11.2 lbs. empty, while a full sized M1A weighs in at 9.5 lbs. I imagine that the Scout/SOCOM versions are lighter yet due to their shorter lengths. If you're going to be humping a rifle in the field, that's a significant weight difference to consider.

Reliability: My M1A never jams. Not ever. But, it did have a critical part failure. Somewhere into the first 100 rounds fired, it broke off one of the two hammer hooks. It continued to function, but it would have been only a matter of time until the other hook broke, rendering the rifle useless. It is a MIM part — as are a couple of other items — and after browsing another board, it seems that this is not that uncommon of a failure. It doesn't happen to everybody, but it does happen to some. That said, Springfield Armory's customer service department is awesome. I had to ship the fire control group back to them (it pops right out the rifle in about 30 seconds), but they paid for 2nd Day Air FedEx both ways and turned the repair job around as soon as they got it. I had the repaired fire control group back in my hands about 8 days after I sent it to them. Also, SA replaced the broken hammer with a forged piece at my request and without disputing it, so I don't anticipate that ever happening again. I have nothing but good things to say about their customer service. I have been advised by other M1A owners to replace my operating rod with a forged piece also, as the original is MIM also and has been known to fail. So I'll be keeping my eyes peeled for one at the gun shows.

Optics: Unless you buy a Scout or SOCOM model, the M1A does not come optics-ready. You have to buy a scope mount for it so as to have a rail on which to mount the rings. Installation of the scope mount is not impossible for a person of average mechanical skill — I mounted mine (from Sadlak) without too much trouble — but it does require some measuring and fiddling to get it right. That said, the iron sights that come on the M1A are superb, and are adjustable out to "that dot is a man?" distances.

Other: The M1A stock was designed for use of iron sights located just above the bore — not 2" higher up like on the AR. In that configuration, the rifle is actually quite comfortable and easy to shoot well. Anyone who has ever fired a Garand would feel right at home. However, because of the downward angle of the buttstock, when you put on a scope mount and even low profile rings on top of that, the scope is mounted too high to get a good cheek weld on the stock. This requires the addition of a cheek rest of some kind. Scoping a flat topped AR doesn't present that same problem because the scope is nearly the same height as the irons in the carry handle on an A1 variant, and because the buttstock comes straight back from the receiver and is inline with the bore, instead of angling downward like on the Springfield. Consequently, the cheek weld height is not as far off. I used a Karsten's Adjustable Cheek Rest for my M1A, which provides enough height to make the scope work right and can be adjusted all the way down for use with the iron sights, but that required drilling a couple of holes through the stock to mount it. (It should be mentioned that most of the M1A scope mounting systems will still allow you to use the irons if you want to, without requiring you to remove the mount.) Having never sighted through an optics mounted Scout or SOCOM model, I couldn't tell you if the problem is the same as on the full sized rifle, but looking at the picture posted above, it looks to me like it might be.

I hope this information helps you to arrive at a decision. I wouldn't let these things deter you if you really want an M1A, and knowing what I know today, I would still buy that rifle and not the other two (AR10 and FNAR) that were on the shelf that day. But the early part of my ownership experience would have been less complicated if I knew these things in advance instead of having to sort of figure it all out on my own. Still... no regrets, and I love my M1A more than either of my ARs.

Re: hmmm POF p308 or SA M1A...

Posted: Mon Feb 22, 2010 9:14 am
by chartreuse
Zoomie wrote:You could also look into the FNAR or the Kel Tec RFB for some more exotic options. I've heard nothing but good things about the FN AR.
That's a good idea. The FN FAL might also be worth consideration, and there are a number of US made receivers available, along with other 922(r) compliance parts. Metric FALs or kits are fairly easy to come by, as are Australian inch versions. OTOH, I'm trying to get the parts together for a Brit L1A1 build and it's proving slow work, to say the least...

Re: hmmm POF p308 or SA M1A...

Posted: Fri Mar 12, 2010 11:29 pm
by big 54r
+1 on the Fn Fal.
Can't go wrong with it and shoots like an AR (meaning smooth!).

Re: hmmm POF p308 or SA M1A...

Posted: Sat Mar 13, 2010 1:48 am
by sixline
The M1A Socom II is an amazing rifle. Out of the box it is deadly accurate and solid as a rock.

As a lot of people have stated here and elsewhere, it is LOUD as can be and the muzzle flash is big and mean. I get a ton of looks when I take it to the range... not all of them good looks :evil2:

I put a holographic sight on it and so far I'm pin point accurate out to 300 yards with both the iron sights and the holo ----> The rifle is waaaay more accurate than I am, I need practice!

The recoil is surprisingly light, considering it's a short-barreled .308.

I am actually going to be selling mine at some point, only for cash reasons. But it's a wonderful rifle!

Re: hmmm POF p308 or SA M1A...

Posted: Sat Mar 13, 2010 2:11 am
by sixline
Image