I was running low on my casting alloy, so I smelted some metals today - 50 lbs recovered range lead, 2.5 lbs 70/30 lead/tin solder, 6 lbs electroype...
Last post
With our shooting volume casting FOR US is the best way to go for me, buddy has been casting 3 days straight now next week will be a reloading day or...
Has any one played with Molly coated lead bullets 1, does it work 2, any fouling problems with the barrel IE build up in the MICRO pours in the lands...
Last post
I just ordered 1200 blue bullets in 9mm from . I’m going to test them out. Theirs are not powder coated and they size after coating is cured. We...
Now, I am very efficient (aka expert) GordonTools.de free Quickload super alternative.
If you need help or even run some numbers for your load, drop...
I used to load for my .38/357 and still have the press, primers. and some lead projectiles. But, I also have about 3/4 pound of Unique and 3/4 pound...
Last post
I had a 30+ year old opened can of SR 4759...it was about 1/3 of a pound...so a fair bit of air space. This was the old metal can.
With the current plandemic ongoing (and other issues) and no end in sight, my wife and I are looking to get into reloading. We need to load for 5.56,...
Last post
Primers are very difficult to kill. If you have them, give them a try.
I have bought bullets at RMR, X-treem and Missouri Bullet recently. Takes a...
Anyone have any advice about trying to reload this tiny round?
Last post
My advice is don't do it. The brass is built to have a lacquer coating that is abraded by most cleaning methods. The data is mostly wildcat and uses...
I'm working on getting a simple 9mm load working for competition in USPSA. Long story made short, I moved away from a 357 Sig to a 9mm G19 because...
Last post
UPDATE: The issue was a poorly adjusted sizing die. Case mouths were 0.355 wide after sizing. Re-checked sizing die and sure enough it was 1/4 above...
I've been reloading since I was 13, i'm 60 now, i've always gone strictly by the reloading data, BUT do to current supply issues, Can you substitute...
Last post
Drop 2grains and you would be good. If you want to be more accurate, do a ladder test in 0.3gr until bolt lift resistance is detected and then drop...
I have been shooting my Bergara HMR B-14 308 for a year and it has not let me down. I have tried IMR 4895, Hodgdons H335 and IMR 4166 all with 168 gr...
Last post
Wow that is some article.
When I went to this thread, I assumed from the title, it would be about handgun shooting situations.
Does anyone here use anything different than the run of the mill scales? I bought some scales from a flea market thinking they would be great but
it...
Last post
RCBS 500 Balance Beam backed by Frankford Arsenal electronic powder scale. I'm paranoid, so measure every load on both.
Hodgdon Powder Company is pleased to announce the acquisition of the Ramshot and Accurate smokeless powder brands and the Blackhorn 209 muzzleloader...
Last post
I was thinking the exact same thing until I remembered that Alliant is under the same umbrella as Federal (Vista Outdoor). As long as they're still...
So, I know this is a silly question, but anybody have any info on the primer supply chain? I'm generally good, but find myself embarasingly short of...
Last post
BTW. Alpine Range has been great for powder and pistol bullets on the shelf if you are in DFW. Really contemplated that 8lb jug of titegroup but have...
If one or more CHLers in DFW area are interested in free metallic pistol/rifle reloading course, I am willing to volunteer as instructor/coach.
We...
Last post
I just cast my vote for yes. I've been interested in learning to reload for a while, but don't know anyone who does it and have always been hesitant...
I came across a freeware reloading program - Gordon's Reloading Tool. It looks similar to QuickLoad. I thought I'd share the link and check if anyone...
Last post
Does it have IMR 800-X and/or military pull .510 bullets?
I have used a lot of different bullets for Piddling and off hand target shooting . Some Factory but mostly handloads.
I am not a picky shooter and if...
Last post
I use Hornady HAP because I'm conscious about lead fouling, but I use Fiocchi lead-free pistol primers as well. If you're using lead styphnate...
Berrys had 200 grn RNFB 45acp bullets, so i figured i would get a few and see how they feel compared to the 185 RNHB we use for range time
I use...
Last post
update
ran 10 at 8.2 of #5 . went to range yesterday afternoon , all ten went off without a hitch and felt very good compared to the other rounds of...
I know H110/W296 and 2400 are powders of choice for full house loads but small pistol magnum primers seem to be very hard to come by right now.
I...
Last post
I don't know anyone who shoots full power .357 Magnum loads all the time. As handloaders we tend to experiment with lots of different loads, even the...
It looks like my stock of brass for my M&P15 is just about done. I'm starting to see case neck cracks. The brass began life as Remington 223 55gr FMJ...
Last post
Now this is easier to say than to practice, and it wasn't until after the development of the Mk 262 Mod 0 that I had any preference for a 5.56mm NATO...
Many years ago I reloaded 357 mag and never had any problems. Recently, I decided to get back into reloading but for rifle, specifically 223. I want...
Last post
Yes, with a Eotech , but was at 50 yds.
100 yds not so good.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
