Page 1 of 11

Show your DIY Ideas and Projects

Posted: Sun Feb 19, 2012 6:36 pm
by Charles L. Cotton
There is a thread on a Corvette forum I read that members use to post their DIY projects. They run from mods for their 'Vette to DIY tools and maintenance equipment. It's a great thread so I'd like to see if we can get one going here. The theme is for DIY stuff that others can use.

Chas.

Re: Show your DIY Ideas and Projects

Posted: Sun Feb 19, 2012 6:42 pm
by RPB
I know this isn't what you mean probably, but :mrgreen:

You know that old Folgers can, and you need target practice?
Image
a slice of floating pool noodle glued to the lid after a trip to the range and you have ...
my DIY Minnow bucket
Image

Just kidding, I drilled the holes :biggrinjester:
Now, I bet you probably meant gun related ... "rlol"
Ok, I better run before a Moderator eats my mouse arrow so I can't post again
Image

Re: Show your DIY Ideas and Projects

Posted: Sun Feb 19, 2012 6:44 pm
by Charles L. Cotton
Just to kick things off, here's a photo of a simple pistol/revolver rack I made from pegboard. It's a heavy pegboard using 1/4" dowel rod cut to an appropriate length to hold the gun. Each end of the pegboard has an L bracket to hold it up when no guns are on it. The L bracket wouldn't be necessary once you have a gun on either end, but I used them anyway.

Chas.

Image

Re: Show your DIY Ideas and Projects

Posted: Sun Feb 19, 2012 7:52 pm
by puma guy
Great Idea Mr. Cotton. Is it permissible to make requests for project plans?

Re: Show your DIY Ideas and Projects

Posted: Sun Feb 19, 2012 9:52 pm
by Charles L. Cotton
puma guy wrote:Great Idea Mr. Cotton. Is it permissible to make requests for project plans?
You bet it is.

Chas.

Re: Show your DIY Ideas and Projects

Posted: Sun Feb 19, 2012 10:56 pm
by mgood

Re: Show your DIY Ideas and Projects

Posted: Mon Feb 20, 2012 7:13 pm
by CWOOD
You might try this 120 lumen LED light for the shotgun. Only $28.23 at Sam's Club. Has the mounting bracket and two tail caps. One cap has coil cord with momentary-on pressure pad and the other has a push button on/off. Mounting bracket also has a weaver mount for even MORE stuff.

I set mine up with the on/off switch but kept the parts. Comes with 1 123 battery.

Fairly tight beam and bright white. You could probably use the hot spot of the beam for your sight.

All aluminum and well made.

http://www.samsclub.com/sams/shop/produ ... rod4980620" onclick="window.open(this.href);return false;

Re: Show your DIY Ideas and Projects

Posted: Wed Feb 29, 2012 11:28 pm
by Carry-a-Kimber
I don't have a picture of it but I made an AR-15 lower receiver vice block out of an old AR-15 mag and a 6" piece of 1x2. Just gut a metal 30rd magazine (I used an old $9 surplus mag), and hammer a 1x2 into the mag from the bottom almost all the way to the feed lips. Insert the magazine as usual into the mag well and clamp the magazine into a vice. It works just as good as a $40 polymer vice block for a fraction of the price.

Re: Show your DIY Ideas and Projects

Posted: Sat Mar 10, 2012 4:29 pm
by Jumping Frog
Well, I just posted my new reloading bench over here: viewtopic.php?f=28&t=53375" onclick="window.open(this.href);return false;

Image

Re: Show your DIY Ideas and Projects

Posted: Sun Mar 11, 2012 6:28 pm
by Nano
This applies only to you who have a Beretta Nano. I, like most folks, have spare keys around that I have long since forgotten what they were used for. I selected one to make a decocker, slide removal tool for my Nano. The Nano has a decocker button, shown at the point of the tool, that is used to deactivate the trigger when pushed. The tool will also turn the cam 1/4 turn to allow the slide to be removed. I can use the tool while it is still on my key ring. It is very simple but handy.
Image

Re: Show your DIY Ideas and Projects

Posted: Sun Mar 11, 2012 8:15 pm
by 74novaman
Jumping Frog wrote:Well, I just posted my new reloading bench over here: viewtopic.php?f=28&t=53375" onclick="window.open(this.href);return false;

Image
I read that post...awesome! You do very nice work sir. :tiphat:

Re: Show your DIY Ideas and Projects

Posted: Thu Mar 29, 2012 6:00 pm
by uthornsfan
I made a collapsible target holder out of some 2x4's and 2x6 and used 4x4's on wire to make swinging targets. When upright its about 7.5 feet tall but broken down its short enough to fit in my 5.5 foot long F150 bed.

[youtube][/youtube]

Re: Show your DIY Ideas and Projects

Posted: Tue May 22, 2012 10:43 am
by Tireshred
I use this in my backyard for practice, it's a GAMO MTS1000, the first gun is a Beeman Vulcan .177 & the second is a Henry with Super Colibri .22 shorts. It keeps my skills up when I only have a few minutes. Click on the picture to see the video. I have great neighbors :lol:

Image

Re: Show your DIY Ideas and Projects

Posted: Tue May 22, 2012 8:28 pm
by surprise_i'm_armed
Charles L. Cotton wrote:Just to kick things off, here's a photo of a simple pistol/revolver rack I made from pegboard. It's a heavy pegboard using 1/4" dowel rod cut to an appropriate length to hold the gun. Each end of the pegboard has an L bracket to hold it up when no guns are on it. The L bracket wouldn't be necessary once you have a gun on either end, but I used them anyway.

Chas.

Image
If that picture was taken in the Cotton home, shouldn't ALL handguns on the pegboard
be of the 1911 persuasion? :-)

SIA

Re: Show your DIY Ideas and Projects

Posted: Sun May 27, 2012 6:01 pm
by Skipper5
Charles L. Cotton wrote:Just to kick things off, here's a photo of a simple pistol/revolver rack I made from pegboard. It's a heavy pegboard using 1/4" dowel rod cut to an appropriate length to hold the gun. Each end of the pegboard has an L bracket to hold it up when no guns are on it. The L bracket wouldn't be necessary once you have a gun on either end, but I used them anyway.

Chas.

Image
Great idea!!! never thought of that!!//Best// John