Marlin 444 question

"A pistol is what you use to fight your way back to the rifle you never should have left behind!" Clint Smith, Thunder Ranch

Moderators: carlson1, Keith B

Post Reply

Topic author
flynbenny
Member
Posts in topic: 3
Posts: 149
Joined: Wed May 28, 2008 11:29 am
Location: The Altered State, Colorado

Marlin 444 question

#1

Post by flynbenny »

I have been offered a chance to pick up a nice Marlin .444 rifle. However, I am concerned about the recoil- I know my 336 chambered in .30-30 has a pretty hefty wallop. Anyone here own one or shoot one?
:txflag:
Glock 19 Gen4 EDC, Glock 42 (golf gun), AR15 14.5" Midlength (nightstand gun), Browning Buckmark (fun gun)

jwp
Member
Posts in topic: 1
Posts: 58
Joined: Sat Dec 25, 2004 1:38 am
Location: Seguin, TX

Re: Marlin 444 question

#2

Post by jwp »

flynbenny wrote:... I am concerned about the recoil- I know my 336 chambered in .30-30 has a pretty hefty wallop....
In that case, there's a good chance that you won't like shooting the .444 much at all. The rifle is essentially the same weight as your 336, and the .444 starts off with roughly 50% more muzzle energy than the .30-30. The recoil calculator at http://www.handloads.com/calc/recoil.asp claims that the .444 will produce about double the recoil energy (21+ foot-pounds) as the .30-30 (10+ foot-pounds) for two sort of generic loads. For that calculation, I used:

For the .444: Bullet weight = 240 grains; powder weight = 45 grains; muzzle velocity = 2350 fps; rifle weight = 8.0 pounds
For the .30-30: Bullet weight = 150 grains; powder weight = 35 grains; muzzle velocity = 2300 fps; rifle weight = 7.0 pounds

The rifle weights were taken from the Marlin web site, adding an allowance for a scope. You didn't say whether this was the 22-inch barrel model or the "444P" with an 18.5-inch ported barrel. If it's the latter, the recoil will be a little more (it's a little lighter than the 22-inch model) and the noise will be a lot more (and even the 22-inch model is a whole lot louder than your .30-30).

The right thing to do, of course, is to try to borrow it for a range trip to see how you like it.
-- John Pierce, jwpretd@satx.rr.com
A patriot must always stand ready to defend his country from its government. -- Edward Abbey

Topic author
flynbenny
Member
Posts in topic: 3
Posts: 149
Joined: Wed May 28, 2008 11:29 am
Location: The Altered State, Colorado

Re: Marlin 444 question

#3

Post by flynbenny »

Thanks, I talked to some people I know last night, one of them has owned a 444 and said it kicks like a mule on steriods. I've decided not to purchase it. My search for a Marlin in .44 Mag renews...
Glock 19 Gen4 EDC, Glock 42 (golf gun), AR15 14.5" Midlength (nightstand gun), Browning Buckmark (fun gun)

Weg
Senior Member
Posts in topic: 1
Posts: 574
Joined: Thu Nov 27, 2008 1:06 pm

Re: Marlin 444 question

#4

Post by Weg »

Owned one, shot one, broke the stock on the third shot ( Marlin did a great job on the warranty repair ) , but the recoil is rough. If you can deal with it, it's a great gun, but I downgraded to a .30.30.

T3hK1w1
Senior Member
Posts in topic: 1
Posts: 315
Joined: Thu Jun 07, 2007 1:55 am
Location: DFW

Re: Marlin 444 question

#5

Post by T3hK1w1 »

I have, and love a Marlin Model 444S (22" barrel, 7.5 lbs) I find that it actually kicks less than my father's 1894 in 44 Mag because the 44 mag has a plastic buttplate and no recoil pad. I put the felt recoil of my 444 at or just below a 300 WM using Buffalo Bore ammo.

Just FYI, my own calculations from a pulled cartridge:
300GR SP (297 grs. measured)
46 grains powder
Claimed MV of 2150

Recoil Velocity-16.4 FPS
Recoil Energy-31.4 foot-pounds
( using http://www.huntamerica.com/recoil_calculator/" onclick="window.open(this.href);return false; )

I'm 5'10" and 170 lbs BTW

atxgun
Senior Member
Posts in topic: 1
Posts: 923
Joined: Tue Oct 23, 2007 3:12 am
Location: Austin, TX
Contact:

Re: Marlin 444 question

#6

Post by atxgun »

I have a marlin 1894 .44 and it can hurt quite a bit with magnums. specials are nice & easy though.

Topic author
flynbenny
Member
Posts in topic: 3
Posts: 149
Joined: Wed May 28, 2008 11:29 am
Location: The Altered State, Colorado

Re: Marlin 444 question

#7

Post by flynbenny »

Thanks for the input. I just purchased a 1894 44 Mag. Does anyone know whether it will cycle 44 spl?
Glock 19 Gen4 EDC, Glock 42 (golf gun), AR15 14.5" Midlength (nightstand gun), Browning Buckmark (fun gun)
Post Reply

Return to “Rifles & Shotguns”