WTB: ar15 16" flattop upper or AK

[killerfly128]

So this poor newleywed wants to get his high cap rifles before teh election ... if you have a lead on anything in my range please pass it along, I will be most greatful

Anyone have a 16" flatop upper for my build? all i can find are uppers that require a bolt and carrier that run $415 and up ... looking to spend less. look dont matter as long as it shoots straight.

If you have a upper for $375 or less WITH the bolt carrier group and charging handle, I will give you cash as soon as you can meet me to do the FTF

If you have a FIXED STOCK ak that fires 7.62 x 39 (looking for a wsar-10 High Cap Model 2 or simalar) .. most i can spend on this is $400 (if some ammo is included or extra mags thats awesome !!!)

[propellerhead]

I got a rifle kit from Del-ton for $475. It was everything but the stripped lower receiver. They might have what you need.

[stroo]

Del-ton has upper kits as well. Check them out.

[McKnife]

PM sent with Offer.

[killerfly128]

I have edited the first post to reflect how much i can spend .... thans everyone for the help so far

[McKnife]

I'm pretty sure you won't find anything that cheap. I even checked Model1Sales and I couldn't get that cheap, even with their crappiest options.

You might want to check Arfcom Equipment Exchange for a VERY used upper. Otherwise, save a little extra and get something that will last you.

[melkor41]

midwayusa has a complete flattop 16" DPMS with bolt and carrier for $405.

Doesnt have forward assist or chamber cover door though.. its the "lightweight and snag free" version that DPMS makes.

[killerfly128]

If new uppers can be found for 405-415 with the bolt group I dont see any reason a used upper would cost me any more than 375

[melkor41]

http://www.ar15.com/forums/topic.html?b ... 9&t=538055

There WAS (its sold now) a 16" hbar upper for $295 without the BCG, I bought a new DPMS BCG from gunmaster in plano last week for $110 which puts you back at $405

And since it is a used barrel/chamber mating with a foreign BCG (foreign as in not the one that origonaly was broken in/warn in with the barrel) you will need to get a set of headspace gagues, that will run you about 75$ for the set. Otherwise you risk a nasty kaboom.

Thats assuming the bolt passes the headspace tests and does not need to have the barrel swapped at another $160-200.

you would be much better off just getting a new upper w/BCG to begin with.

[propellerhead]

If new uppers can be found for 405-415 with the bolt group I dont see any reason a used upper would cost me any more than 375

Del-ton has complete uppers for $395, or $387 if you're a member of AR15.com.

http://www.del-ton.com/ProductDetails.a ... ode=DT1023

Is that close enough? They are not in TX so no tax. Just add shipping.

[melkor41]

If new uppers can be found for 405-415 with the bolt group I dont see any reason a used upper would cost me any more than 375

Del-ton has complete uppers for $395, or $387 if you're a member of AR15.com.

http://www.del-ton.com/ProductDetails.a ... ode=DT1023

Is that close enough? They are not in TX so no tax. Just add shipping.

Nice find, im bookmarking that for evil black rifle #2!! (they are right.. its a sickness.. you cant just build one...)

[Tactical_Texan_CHL]

(they are right.. its a sickness.. you cant just build one...)

Tell me about it! I've built 4 and now I'm itching to do another one! I want to get my next lower registered as an SBR and build a little nasty lookin' fella.

[killerfly128]

well i had found a AK with 800 rounds of ammo ... but the guy is playing games accepting offers from 2 difrent people ... i dont know if i like where its going

[KC5AV]

well i had found a AK with 800 rounds of ammo ... but the guy is playing games accepting offers from 2 difrent people ... i dont know if i like where its going

I'd be letting it go to the other guy.

[killerfly128]

I am .... i dont feel warm and fuzzy about it .... I dont think the other guy is eather .... i think ill send him a offer of 350 lol