Attention Law Experts

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

User avatar
carlson1
Moderator
Posts: 11865
Joined: Sat Dec 03, 2005 1:11 am

Attention Law Experts

Post by carlson1 »

I have an AR 15 "pistol." It has a 10 inch barrel. I want to know if I change the stock to a regular stock does this put the "pistol" into a "rifle" category, thus it becomes too short and illegal? (It is stamped "RRA PISTOL ONLY.")
Image
Image
Delta
Member
Posts: 61
Joined: Fri Jun 10, 2005 2:21 am
Location: Dallas, Texas

YES

Post by Delta »

If you put a regular stock on that weapon, then it becomes an SBR
(Short Barreled Rifle)

That would negate a 200.00 tax stamp for NFA.


Seeing as how it is stamped RRA Pistol. You will be in violation and that will make it a NO NO. You are pretty much limited to what you have
Yesterday was the only easy day !!!
User avatar
carlson1
Moderator
Posts: 11865
Joined: Sat Dec 03, 2005 1:11 am

Re: YES

Post by carlson1 »

Delta wrote:If you put a regular stock on that weapon, then it becomes an SBR
(Short Barreled Rifle)

That would negate a 200.00 tax stamp for NFA.


Seeing as how it is stamped RRA Pistol. You will be in violation and that will make it a NO NO. You are pretty much limited to what you have
Makes sense to me - Thank you for your help. I do NOT want a $200.00 stamp.
Image
bigdook
Member
Posts: 67
Joined: Sun Oct 29, 2006 5:12 pm

Post by bigdook »

what would a folding type stock do to it, in regards to the law?

by the way nice gun.( i wonder if you could carry it concealed)
They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
~Benjamin Franklin
rspeir
Member
Posts: 51
Joined: Sun Apr 10, 2005 2:44 pm
Location: Austin

Post by rspeir »

Adding a folding stock would still make it a SBR.
Rex B
Senior Member
Posts: 3616
Joined: Thu Jul 06, 2006 3:30 pm
Location: DFW

SBR

Post by Rex B »

Change the barrel while you are at it, and you should be good, no?
-----------
“Sometimes there is no alternative to uncertainty except to await the arrival of more and better data.” C. Wunsch
Delta
Member
Posts: 61
Joined: Fri Jun 10, 2005 2:21 am
Location: Dallas, Texas

Post by Delta »

OK

1. Once the AR15 pistol configuration has been registered on a 4473 with the ATF. It will have to stay a pistol. If you were pulled over and they found the RRA pistol lower with a rifle stock, there would be a pretty good chance you are going to jail. Just the same as having a rifle with a short barrel and pistol grip and no stock... jail.
Most LEO's do not really know the different configurations unless they are really into the law and the AR15, BATF rules Ect....

This not a slam on LEO's either, I have quite a few friends that are LEO.

2. The one way to get around that legally is to pay the $200.00 and fill out a Form 4. Then essentially it is an SBR then you can do whatever.

To rebarrel that upper would be at least 125-175 anyway, add a stock and your at another 75.

3. You cannot add a stock to this weapon without the form 4, because that would construe intent for manufacturing or altering the registered receiver. The only part of the AR that is tracked and registered.

4. You could sell it to a dealer or someone else, then just buy your ar15 of choice. Less headache that way.

There is a bunch of case law and actual cases out there on the internet but this will give you an idea what to expect
Yesterday was the only easy day !!!
HankB
Senior Member
Posts: 1394
Joined: Mon Aug 08, 2005 2:03 pm
Location: Central TX, just west of Austin

Post by HankB »

Delta wrote:1. Once the AR15 pistol configuration has been registered on a 4473 with the ATF. It will have to stay a pistol.
I agree with the previous postings that simply putting a stock on it would make it an SBR, which could have seriously bad legal consequences if done without completion of the proper paperwork in advance.

BUT . . . if you put on at least a 16" barrel first, there should be no problem, as then you've got a rifle, rather than a pistol.

Consider that Thompson Center's "Contender" pistols are available with both shoulder stocks AND 16" barrels. The rule there is that you CAN convert a Contender pistol into a rifle if you first put on a 16" or longer barrel, and THEN add the shoulder stock. (Adding the stock first would put you, at least for a short time, in possession of an SBR.)

IANAL, so if there's some law that allows rifle conversions of Contenders and disallows rifle conversions of ARs, please cite.
Original CHL: 2000: 56 day turnaround
1st renewal, 2004: 34 days
2nd renewal, 2008: 81 days
3rd renewal, 2013: 12 days
casselthief
Banned
Posts: 632
Joined: Tue Nov 14, 2006 5:05 pm
Location: yes, I have one.

Post by casselthief »

if it's a pistol, why does it need a stock?

and, what caliber does that thing shoot?

what's that foam thing on the back of it? looks like a handle, or something...
KinnyLee
Senior Member
Posts: 1295
Joined: Thu Sep 29, 2005 12:59 pm
Contact:

Post by KinnyLee »

casselthief wrote:if it's a pistol, why does it need a stock?

and, what caliber does that thing shoot?

what's that foam thing on the back of it? looks like a handle, or something...
It's a 5.56mm and the foam thing is the buffer tube.
Mike1951
Senior Member
Posts: 3532
Joined: Fri Dec 02, 2005 3:06 am
Location: SE Texas

Post by Mike1951 »

And though you didn't mention it, you are also prohibited from adding any kind of horizontal or vertical (perpendicular to barrel) foregrip to what you have.
Mike
AF5MS
TSRA Life Member
NRA Benefactor Member
casselthief
Banned
Posts: 632
Joined: Tue Nov 14, 2006 5:05 pm
Location: yes, I have one.

Post by casselthief »

what does a buffer tube do? help reduce muzzle rise during fire?
User avatar
Mithras61
Senior Member
Posts: 913
Joined: Wed Aug 02, 2006 8:43 pm
Location: Somewhere in Texas

Post by Mithras61 »

casselthief wrote:what does a buffer tube do? help reduce muzzle rise during fire?
A buffer tube houses the buffer spring & buffer that allows the bolt to move back to eject a spent cartridge and pushes the bolt forward to load a fresh round from the magazine. It helps reduce the percieved recoil from the firearm as well.

It is normally concealed inside the stock of an M4/M16/AR15 series rifle. Since the pistol does not have a stock, it is exposed.
casselthief
Banned
Posts: 632
Joined: Tue Nov 14, 2006 5:05 pm
Location: yes, I have one.

Post by casselthief »

Image

ahthankyou!
User avatar
hi-power
Senior Member
Posts: 748
Joined: Wed Nov 22, 2006 10:43 am
Location: Grapevine, TX

Post by hi-power »

casselthief wrote:Image
Quartermaster Clerk: One buffer tube with buffer spring.
Austin Powers: [to Vanessa] That's not mine.
Quartermaster Clerk: One credit card receipt for buffer tube and spring signed by Austin Powers.
Austin Powers: I'm telling ya baby, that's not mine.
Quartermaster Clerk: One warranty card for buffer tube and spring, filled out by Austin Powers.
Austin Powers: I don't even know what this is! This sort of thing ain't my bag, baby.
Quartermaster Clerk: One book, "Buffer tubes, Springs And Me: This Sort of Thing Is My Bag Baby", by Austin Powers.
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”