9mm Ruger LCR
Moderator: carlson1
9mm Ruger LCR
If anyone owns one of these, I sure would like to know what you think of it.
TSRA
NRA
TFC
USMC 1961-1966
NRA
TFC
USMC 1961-1966
Re: 9mm Ruger LCR
I ordered one from Bud's on the 27th. It shipped yesterday, and should be here the middle of next week. I will post an update once I get it to the range.
Re: 9mm Ruger LCR
Ruger LCR has been my daily carry in a Galco ankle holster for the last two years. Small enough to conceal easily with boot cut jeans. Smaller frame and less mass does mean a little more vertical recoil than a full size frame would have. Long trigger pull takes some getting used to. The newer "S" version supposedly has addressed that with a different trigger. I would definitely look at that version first. You will want to add the magazine extender "lip" to get one more finger on the grip. Makes a big difference. I have put more than 200 rounds through mine at the range with zero issues. It gets cleaned monthly. Plenty of good guns out there in this size. You will be pleased with the Ruger.
Re: 9mm Ruger LCR
Thanks guys. Katmandu, I will be looking for your report. I actually have the LCR in .38sp but am intrigued with the 9mm. I thought about the LCR in 357 but would probably shoot nothing but 38 thru it.
TSRA
NRA
TFC
USMC 1961-1966
NRA
TFC
USMC 1961-1966
Re: 9mm Ruger LCR
Too many single stack 9mm's on the market that beat the LCR in size. Seems like a novelty to have one in 9mm.
The only reason I like having the LCR is that it's in .357, so I can choose to carry .357 if I take it camping, hiking, etc. Other than that, it's a bulky gun
The only reason I like having the LCR is that it's in .357, so I can choose to carry .357 if I take it camping, hiking, etc. Other than that, it's a bulky gun
Re: 9mm Ruger LCR
I have the LCR in 9mm, it is a bit more snappy than the 38 although not enough to be concerned with. I bought it to have my guns in common calibers and have my 357 on GunBroker now to sell. The optional moon clips have a plus and minus scenario, they make reloading really fast although carrying a spare is a bit bulky but still manageable. The gun will operate fine without the moon clips although the extractor rod does not eject them. I just tapped the barrel with my hand a 4 out of 5 came right out, the 5th I had to use a small rod to tap it out from the inside. The gun comes with 3 moon clips and I will buy another 6 more when I see them on the market. Overall I am satisfied with it and my Crimson Trace grips fit on it as well.
Salty1
Re: 9mm Ruger LCR
I think your confusing the LCR and LC9..... Unless of course that Ruger has developed a revolver that takes a mag......by the way, welcome to the forum....Txgunguy wrote:Ruger LCR has been my daily carry in a Galco ankle holster for the last two years. Small enough to conceal easily with boot cut jeans. Smaller frame and less mass does mean a little more vertical recoil than a full size frame would have. Long trigger pull takes some getting used to. The newer "S" version supposedly has addressed that with a different trigger. I would definitely look at that version first. You will want to add the magazine extender "lip" to get one more finger on the grip. Makes a big difference. I have put more than 200 rounds through mine at the range with zero issues. It gets cleaned monthly. Plenty of good guns out there in this size. You will be pleased with the Ruger.

Salty1
Re: 9mm Ruger LCR
Oops.
In the words of Gilda Radner of SNL Church Lady "never mind"........
:)
In the words of Gilda Radner of SNL Church Lady "never mind"........
:)
- RogueUSMC
- Senior Member
- Posts: 1513
- Joined: Tue Apr 30, 2013 12:55 pm
- Location: Smith County
- Contact:
Re: 9mm Ruger LCR
Salty1 wrote:I think your confusing the LCR and LC9..... Unless of course that Ruger has developed a revolver that takes a mag......by the way, welcome to the forum....Txgunguy wrote:Ruger LCR has been my daily carry in a Galco ankle holster for the last two years. Small enough to conceal easily with boot cut jeans. Smaller frame and less mass does mean a little more vertical recoil than a full size frame would have. Long trigger pull takes some getting used to. The newer "S" version supposedly has addressed that with a different trigger. I would definitely look at that version first. You will want to add the magazine extender "lip" to get one more finger on the grip. Makes a big difference. I have put more than 200 rounds through mine at the range with zero issues. It gets cleaned monthly. Plenty of good guns out there in this size. You will be pleased with the Ruger.

http://www.gunsandammo.com/first-look/f ... -revolver/
It is a revolver that shoots 9mm from moon clips...
A man will fight harder for his interests than for his rights.
- Napoleon Bonaparte
PFC Paul E. Ison USMC 1916-2001
- Napoleon Bonaparte
PFC Paul E. Ison USMC 1916-2001
Re: 9mm Ruger LCR
Has anyone heard of bullet creep being a problem in this revolver, especially 124 gr or heavier?
TSRA
NRA
TFC
USMC 1961-1966
NRA
TFC
USMC 1961-1966
-
- Senior Member
- Posts: 2415
- Joined: Thu Dec 23, 2004 10:57 pm
- Location: Denton County
- Contact:
Re: 9mm Ruger LCR
' Got one the same time Salty1 did. Punchy, but not painful. Same smooth trigger as in .38 LCR I sold to buy the 9. Have not yet noticed or checked for bullet creep, but methinks doubtful as the gun weighs a little over 17 ounces (compared to 13.5 for the .38). And if the bullet did slip the crimp, it has a whole lot longer way to go before locking up cylinder (as seen before in some real light j-frames).
CHL Instructor since 1995
http://www.dentoncountysports.com "A Private Palace for Pistol Proficiency"
http://www.dentoncountysports.com "A Private Palace for Pistol Proficiency"
Re: 9mm Ruger LCR
I am a newbie gun owner - just purchased my first gun, a Ruger LCR 9mm. It is EXACTLY what I wanted, and I couldn't be happier.
To answer the question above, bullet creep is a definite issue with some ammo. I knew about the potential, so when I got a box of Federal 115 gr FMJ with Aluminum cases, I was very cautious ... and it is a good thing I was. After 15 rounds I had two creep so far the revolver wouldn't cycle, and two bullets fall completely out of their case.
I have shot maybe 300 rounds through my LCR, and until now there was only one other ammo that had any creep problems (1 round of generic target range ammo).
I tried to return the ammo to Walmart, but they said they can not take ammo back, and if I had an issue I needed to resolve it with the manufacturer (thanks a lot for nothing). I have contacted Federal.
To answer the question above, bullet creep is a definite issue with some ammo. I knew about the potential, so when I got a box of Federal 115 gr FMJ with Aluminum cases, I was very cautious ... and it is a good thing I was. After 15 rounds I had two creep so far the revolver wouldn't cycle, and two bullets fall completely out of their case.
I have shot maybe 300 rounds through my LCR, and until now there was only one other ammo that had any creep problems (1 round of generic target range ammo).
I tried to return the ammo to Walmart, but they said they can not take ammo back, and if I had an issue I needed to resolve it with the manufacturer (thanks a lot for nothing). I have contacted Federal.