Standard Operating Procedure

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Post Reply
android
Senior Member
Posts: 508
Joined: Sun Jul 26, 2009 11:11 pm

Standard Operating Procedure

Post by android »

I haven't seen much talk about storage SOP. Here's what I do that I've figured out on my own, so feel free to poke holes in my plan.

1) My carry pistol remains loaded and in the holster and the whole package goes directly from my belt into the safe. I don't unload it nightly to avoid bullet setback and to minimize handling, loading and unloading. I believe a loaded gun belongs in a holster or in your hand being shot.

If I'm wanting to shoot the .40 at the range, the carry pistol and the matching 9mm get swapped, the .40 gets unloaded and the 9mm gets loaded and holstered. It stays that way until I'm back home and switching back around again.

2) Everything else going in or out of the safe is cleared both going in and out. All are stored with mags removed.

3) Mags loaded with SD ammo are also stored in the safe for easy access, but not inserted.

4) Guns never go from dry firing to loaded. They always go through a clear, into the safe, loaded and holstered. This is to avoid the dry fire, forget I loaded it, shoot the TV ND that I've read about.

Please share and discuss your procedures.
TheReverend
Member
Posts: 91
Joined: Wed Nov 18, 2009 11:23 pm
Location: Plano, TX

Re: Standard Operating Procedure

Post by TheReverend »

I keep the daily carry in the safe loaded and chambered. If you need it in the middle of the night it's bad enough you have to take it out of the safe, I don't want to waist any more time loading/cambering a bullet.
I have a Springfield XDM so I have an indication for a chambered bullet and an indication for a cocked trigger (both indicator are visible and physical) so no risk for forgetting if it's loaded or not.
When you got to shoot, shoot. Don't talk.
User avatar
Tha_Veteran
Member
Posts: 116
Joined: Sun Nov 01, 2009 11:33 pm
Location: Denton

Re: Standard Operating Procedure

Post by Tha_Veteran »

Where is a good place for an easy reach safe :bigear:
"Speak softly and carry a big stick" - T. Roosevelt

11/01/09 Class Taken
11/05/09 Packet sent
11/10/09 Packet received
11/27/09 Processing Application
12/10/09 Application Completed - license issued
12/14/09 Plastic in Hand
User avatar
karl
Senior Member
Posts: 539
Joined: Tue Sep 08, 2009 2:54 am
Location: Houston

Re: Standard Operating Procedure

Post by karl »

TheReverend wrote:I keep the daily carry in the safe loaded and chambered. If you need it in the middle of the night it's bad enough you have to take it out of the safe, I don't want to waist any more time loading/cambering a bullet.
I have a Springfield XDM so I have an indication for a chambered bullet and an indication for a cocked trigger (both indicator are visible and physical) so no risk for forgetting if it's loaded or not.
:iagree:

If you always keep the handguns in your safe loaded you will never make that mistake. I felt the same way early on but eased into the idea.

Some tips I received until I got used to the idea of a loaded gun in my safe: Every time you pull it out of the safe check the chamber. Don't be satisfied with a little hole in the ejection port, I like to see the round in there, all it takes is pulling the slide back half an inch. That way you're always reminded your gun is hot.
The spirit of resistance to government is so valuable on certain occasions, that I wish it to be always kept alive. It will often be exercised when wrong, but better so than not to be exercised at all. I like a little rebellion now and then. It is like a storm in the atmosphere. -Thomas Jefferson
CompVest
Senior Member
Posts: 3079
Joined: Sun Jan 02, 2005 7:17 pm

Re: Standard Operating Procedure

Post by CompVest »

Treat every gun all the time like they are loaded!
Women on the DRAW – drill, revise, attain, win
Coached Practice Sessions for Women
User avatar
joe817
Senior Member
Posts: 9317
Joined: Fri May 22, 2009 7:13 pm
Location: Arlington

Re: Standard Operating Procedure

Post by joe817 »

CompVest wrote:
Treat every gun all the time like they are loaded!
Ab-So-Lutely! I keep my guns loaded and chambered. Whenever I take out a gun to inspect it, look at it, admire it, or play with it, it's ALWAYS(100% of the time) mag ejected, slide racked(gun pointed straight up, btw) and a visual inspection of the chamber and ejection port to assure myself it's not loaded.

I have a trust issue when it comes to guns. Relying on memory if a gun is loaded or not can be fatal to one's health.

I HAVE to satisfy myself that the gun is indeed empty before I start toying with it. I've had some guns over the years that had a firing pin indicator but I never trusted those things, when it came to handling a gun.
Diplomacy is the Art of Letting Someone Have Your Way
TSRA
Colt Gov't Model .380
User avatar
A-R
Senior Member
Posts: 5776
Joined: Sun Apr 12, 2009 5:01 pm
Location: Austin area

Re: Standard Operating Procedure

Post by A-R »

joe817 wrote:
CompVest wrote:
Treat every gun all the time like they are loaded!
Ab-So-Lutely! I keep my guns loaded and chambered. Whenever I take out a gun to inspect it, look at it, admire it, or play with it, it's ALWAYS(100% of the time) mag ejected, slide racked(gun pointed straight up, btw) and a visual inspection of the chamber and ejection port to assure myself it's not loaded.

I have a trust issue when it comes to guns. Relying on memory if a gun is loaded or not can be fatal to one's health.

I HAVE to satisfy myself that the gun is indeed empty before I start toying with it. I've had some guns over the years that had a firing pin indicator but I never trusted those things, when it came to handling a gun.
:iagree:

110%

And a visual and tactile inspection of the open chamber EVERY TIME cannot be over-emphasized. If you just rely on racking the slide to clear the weapon, then what happens if your extractor breaks and leaves a round in the tube?
HankB
Senior Member
Posts: 1394
Joined: Mon Aug 08, 2005 2:03 pm
Location: Central TX, just west of Austin

Re: Standard Operating Procedure

Post by HankB »

Elmer Keith once wrote words to the effect that all his guns were always loaded - people are never accidentally shot with loaded guns, only unloaded guns.

Old Elmer and I wouldn't see eye-to-eye on a number of things if he were still around, but this is one point where we'd be in agreement; as far as I'm concerned, I behave as if every gun I have is always loaded.
Original CHL: 2000: 56 day turnaround
1st renewal, 2004: 34 days
2nd renewal, 2008: 81 days
3rd renewal, 2013: 12 days
User avatar
troglodyte
Senior Member
Posts: 1322
Joined: Fri Dec 24, 2004 4:16 pm
Location: Hockley County
Contact:

Re: Standard Operating Procedure

Post by troglodyte »

austinrealtor wrote:
joe817 wrote:
CompVest wrote:
Treat every gun all the time like they are loaded!
Ab-So-Lutely! I keep my guns loaded and chambered. Whenever I take out a gun to inspect it, look at it, admire it, or play with it, it's ALWAYS(100% of the time) mag ejected, slide racked(gun pointed straight up, btw) and a visual inspection of the chamber and ejection port to assure myself it's not loaded.

I have a trust issue when it comes to guns. Relying on memory if a gun is loaded or not can be fatal to one's health.

I HAVE to satisfy myself that the gun is indeed empty before I start toying with it. I've had some guns over the years that had a firing pin indicator but I never trusted those things, when it came to handling a gun.
:iagree:

110%

And a visual and tactile inspection of the open chamber EVERY TIME cannot be over-emphasized. If you just rely on racking the slide to clear the weapon, then what happens if your extractor breaks and leaves a round in the tube?
+2 All my guns are "loaded" whether they are or not.

I figure I'm not the only one here that goes to a gun shop or just out with buddies that watch the other guy drop the mag and eject a round, check the chamber then hand the gun to me so I can cycle the slide and visually inspect the chamber/mag well (or cylinder). Even if I watched over the guys shoulder I still check it myself. Overkill? Maybe but better than "a kill". It doesn't hurt to be safe.
User avatar
The Annoyed Man
Senior Member
Posts: 26886
Joined: Wed Jan 16, 2008 12:59 pm
Location: North Richland Hills, Texas
Contact:

Re: Standard Operating Procedure

Post by The Annoyed Man »

Ditto "always loaded" and all that good stuff. In fact, any gun that isn't in my safe IS loaded. That said, those guns which I store in my safe are actually unloaded, even though I don't treat them that way. I still assume they are loaded.

Having unintentionally negligently discharged a .44 magnum right next to my own left ear once, I have been paranoid about checking the loaded condition of any pistol I pick up ever since. My ears have been ringing ever since that day.
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

― G. Michael Hopf, "Those Who Remain"

#TINVOWOOT
User avatar
KFP
Senior Member
Posts: 724
Joined: Wed Apr 25, 2007 4:11 pm
Location: McKinney, TX

Re: Standard Operating Procedure

Post by KFP »

The Annoyed Man wrote:Having unintentionally negligently discharged a .44 magnum right next to my own left ear once, I have been paranoid about checking the loaded condition of any pistol I pick up ever since. My ears have been ringing ever since that day.
What? :biggrinjester:
Life Member NRA & TSRA
rdcrags
Senior Member
Posts: 456
Joined: Sun Nov 12, 2006 8:54 pm
Location: Houston and Colorado

Re: Standard Operating Procedure

Post by rdcrags »

I guess my SOP is the most simple of all. No kids around, no safe. If stolen, tell State Farm and police. Except when cleaning or showing to someone, revolvers are fully loaded and semi is always loaded and chambered. Always dangerous to handle; no wondering if or whether.

TX CHL 1997
CO CHP 2001
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”